03 9117 6195 Free quote

How to Restore Grout Colour: Clean, Recolour or Regrout

15 November 2026 · 5 min read

Most grout that has turned grey, brown or patchy can be brought back with a deep clean using an alkaline or oxygen-based cleaner and a stiff nylon brush, followed by sealing once it is dry. If the colour still will not lift, a grout colourant can recoat the lines evenly. Grout that is cracked, crumbling or missing needs to be raked out and replaced.

Why grout changes colour

Standard cement-based grout is porous. Over time it soaks up whatever lands on it, and the colour shifts. The usual causes are:

  • Ground-in dirt on floors, especially in kitchens and entries.
  • Soap scum and body oils in showers, which leave a dull grey film.
  • Mould, showing as black or dark green spots, mainly in wet areas with poor ventilation.
  • Mopping with dirty water, which deposits grime into the grout lines each time.
  • Worn or missing sealer, which lets everything soak in faster.
  • Harsh cleaners, which can bleach coloured grout unevenly or etch the surface.

Epoxy grout, common in newer bathrooms and splashbacks, is far less porous and rarely stains deeply. If yours is epoxy, surface cleaning usually does the job.

Step 1: Check the tiles before you choose a cleaner

What you can use on the grout is limited by the tiles next to it. Ceramic and porcelain tiles tolerate most household cleaners. Natural stone such as marble, limestone, travertine and some slate can be etched by acids, including vinegar, and dulled by some strong alkalis. For stone, use a cleaner labelled stone-safe and check the product instructions.

Step 2: Deep clean the grout

  1. Sweep or vacuum floors to remove grit that would scratch tiles during scrubbing.
  2. Apply your cleaner to a section of about one square metre. A heavy-duty alkaline tile and grout cleaner suits greasy floors. For white or light grout, an oxygen bleach product (sodium percarbonate dissolved in warm water) is a good option for lifting organic staining.
  3. Let it sit for the time on the label, usually 5 to 10 minutes. Do not let it dry out.
  4. Scrub along the grout lines with a stiff nylon grout brush or an old toothbrush. Never use a wire brush, which scratches tile glaze and wears grout away.
  5. Rinse thoroughly with clean water and a clean mop or cloth, changing the rinse water often. Leftover cleaner attracts dirt.
  6. Dry with a towel and check the result once completely dry, as damp grout always looks darker.

Dealing with mould in grout

Surface mould in grout can usually be cleaned with a mould cleaner used as the label directs. Ventilate the room, wear gloves and eye protection, and never mix bleach-based products with ammonia, acids or other cleaners, as Better Health Channel warns this can release hazardous fumes. If dark spots return within days, the mould may be deep in the grout or behind it, and the moisture source needs attention.

Our guide to removing mould from bathroom ceilings and silicone covers the surrounding areas, and soap film on glass is handled in removing soap scum from shower screens.

Step 3: Seal clean cement grout

Once grout is clean and completely dry, usually after 24 hours, apply a penetrating grout sealer with a small brush or applicator bottle. Sealer does not change the colour much, but it slows down how fast dirt and water soak in. Wipe any sealer off the tile surface promptly, and follow the product label for drying and resealing times. Epoxy grout does not need sealing.

When cleaning is not enough: grout colourant

Some grout has been stained by years of dye, rust or mismatched repairs, and will not clean back to an even colour. A grout colourant, sometimes called grout paint or colour sealer, is a coloured coating brushed onto the grout lines.

  • It can even out patchy grout or change the colour completely, for example from stained white to light grey.
  • It only bonds properly to clean, dry, sound grout, so the deep clean above still comes first.
  • Apply carefully with a fine brush and wipe any excess off the tile before it dries.
  • It is a coating, not new grout, and may need touching up in high-wear areas.

When to regrout

Cleaning and colouring will not fix grout that is structurally failing. Consider regrouting, or getting advice, if you see:

  • cracks or gaps along grout lines
  • grout that crumbles when you scrub it
  • loose or drummy-sounding tiles
  • persistent dampness or mould returning quickly in a shower

In a shower, failing grout can let water reach the wall or floor behind the tiles, so it is worth acting on.

Keeping grout looking even

  • Mop floors with clean water and change it as soon as it looks dirty.
  • Squeegee or wipe shower walls after use and run the exhaust fan.
  • Use pH-neutral cleaners for routine cleaning.
  • Reseal cement grout as the sealer’s label recommends.

For gentler everyday cleaning options, see eco-friendly cleaning: what actually works.

Getting professional help

Rotary scrubbers and controlled high-temperature rinsing can reach deeper into grout than hand scrubbing. If you would like Prime Cleaners to take care of it, our tile and grout cleaning team can clean, and where suitable seal, floors and showers.

Quick answers

Will bleach whiten grout?

Bleach can lighten mould stains, but it does not remove ground-in dirt and can fade coloured grout unevenly. Use it only as the label directs, ventilate well and never mix it with other cleaners.

Want it done for you?

Prime Cleaners handles end of lease, carpet and upholstery cleaning across Melbourne, with police-checked, insured cleaners and a 72-hour re-clean guarantee on bond cleans.

Call Free quote