Small patches of mould on a painted bathroom ceiling or on silicone can usually be cleaned at home with household detergent or white vinegar, applied with a damp microfibre cloth and given time to work. Ventilate the room and wear gloves, eye protection and a P1 or P2 mask while you do it. Deep black staining inside silicone often will not lift completely, and the mould will keep returning unless the moisture behind it is dealt with.
Safety before you start
The Better Health Channel’s guide to mould removal at home sets out the precautions, and they are worth following closely when you are working overhead.
- Ventilate. Open the window and door and run the exhaust fan before, during and after cleaning.
- Cover up. Rubber gloves, eye protection, long sleeves or overalls, a shower cap and a P1 or P2 mask from the hardware store. Eye protection matters on ceilings, where drips fall straight down.
- Check who should stay away. Better Health advises that pregnant women, children and people with weakened immune systems or chronic lung disease should not remove mould or be present while it is removed. Anyone with a heart or lung condition should get medical advice before using a P2 mask.
- Do not dry brush. Brushing dry mould flicks spores into the air. If you vacuum the area, use a vacuum with a HEPA filter.
- Never mix bleach with ammonia, vinegar or other acids, or other cleaners. The combinations can release hazardous chlorine or chloramine fumes. Use one product at a time and rinse the surface before changing.
Find the moisture first
Mould needs damp, poorly ventilated conditions. Clean it without changing those conditions and it will be back within weeks. Before you clean, look for the cause:
- An exhaust fan that is not used, is too weak, or has a grille clogged with dust
- No window, or a window that stays shut through Melbourne’s cold, damp months
- Brown water stains, bubbling paint or sagging plaster, which point to a leak from a roof, gutter, pipe or the bathroom above
- Mould that always returns to the same patch near an external wall or above the shower
If you suspect a leak, call a plumber if you own the home, or report it to the rental provider if you rent. Cleaning will not fix it.
Cleaning mould off a bathroom ceiling
- Set up safely. Lay an old towel over the floor and vanity. Use a stable step ladder, or better, a flat mop with an extension handle and a microfibre pad so you are not working directly under the patch.
- Mix your cleaner. Warm water with household detergent, or white vinegar, is enough in many cases. If you use a commercial mould remover, check the label for the right dilution and which surfaces it suits.
- Apply, do not soak. Wring the cloth or pad until it is damp rather than dripping. Painted plasterboard does not like being wet, and drips go straight into your eyes.
- Let it work. Give the cleaner several minutes before you wipe, then wipe in one direction.
- Rinse the cloth separately. Rinse it often in a second bucket of clean water so you are not spreading mould across the ceiling.
- Dry the room. Leave the window open and the fan running until the ceiling is fully dry. Wash the cloths and your clothes on a hot cycle, separately from other laundry.
If a grey shadow remains once the ceiling is clean and dry, the paint itself may be stained. That usually needs a stain-blocking sealer and repaint. In a rental, do not paint without the rental provider’s agreement; report it instead.
Cleaning mould off silicone
Silicone sealant around the shower, bath and vanity is soft and slightly porous, so mould grows into it rather than sitting on top. Surface mould comes off; mould that has grown through the bead often does not.
- Wash the bead with detergent solution and an old toothbrush to remove soap film, then rinse.
- Apply vinegar or a mould remover that its label says is suitable for silicone.
- For stubborn lines, press a strip of paper towel soaked in the product along the bead and leave it for the time the label allows.
- Remove the strip, rinse well and dry the bead with a cloth.
Black spots that remain deep inside the silicone mean the sealant needs replacing. Peeling, cracked or gapped silicone is also a sign water may be getting behind the tiles. Owners can reseal; renters should report it and ask before making any changes.
When it is too big for a DIY clean
Better Health describes home removal as suitable for small to medium areas. If mould covers a large area, keeps coming back after cleaning, or appeared after a flood or major leak, stop and get help. Your local council’s environmental health team, an occupational hygienist or a mould remediation professional can advise. For water damage, see our flood damage restoration page.
Renting? Who deals with the mould
Consumer Affairs Victoria’s page on pests, infestations and mould says renters should tell the rental provider straight away when they see mould or damp. Responsibility depends on the cause:
- Building defects and leaks: if a problem with the property, such as a faulty window frame letting rain in, causes mould or damp, the rental provider may be responsible. It can be requested as a repair, and as an urgent repair if it makes the property unsafe.
- Renter-caused mould: if mould formed because, for example, the bathroom fan was not used, the renter may be responsible for cleaning it.
The CAV cleanliness guideline expects showers, baths and vanities to be free of mould caused by a renter’s failure to take care. Report structural mould in writing and keep photos with dates, so it is not mistaken for a cleaning issue at your final inspection.
Getting the bathroom ready to hand back
Once the mould and its cause are sorted, the rest of the bathroom is routine cleaning. If you would rather hand it over, Prime Cleaners Melbourne can quote on end of lease cleaning or tile and grout cleaning.
Quick answers
Is bleach better than vinegar for bathroom mould?
Not necessarily. Better Health notes household detergent or white vinegar is often enough. Bleach-based products can lighten stains but must be used exactly as labelled, with good ventilation, and never combined with vinegar, ammonia or other cleaners.
Can I paint over mould on a bathroom ceiling?
Painting over mould without cleaning it and fixing the moisture just hides it for a while. In a rental, do not paint without the rental provider's agreement; report the problem instead.