03 9117 6195 Free quote

Kitchens and bathrooms

Tile and Grout Cleaning Melbourne

Grout is porous, so it soaks up grease in the kitchen and soap scum and mould in the bathroom. A deep clean matched to your tile type brings back the original colour wherever the grout itself is still sound.

  • Kitchen splashbacks, floors, showers and bathroom walls
  • Cleaner chosen for ceramic, porcelain or natural stone
  • Soap scum, grease and surface mould treated
  • Grout lines agitated, rinsed and extracted

Why grout turns dark

Tiles are glazed and shed dirt easily, but the cement-based grout between them is full of tiny pores. Mop water carries soil into those pores, cooking oil settles on splashbacks, and in showers, soap residue and body oils build a film that mould can grow on.

Mopping spreads that soil further along the lines, which is why a floor can look clean while the grout keeps getting darker. Lifting it means breaking the residue down and getting it out of the joint, not just wiping over the top.

Not all grout is the same. Most homes have cement-based grout, which is the most absorbent and shows dirt fastest. Epoxy grout, found in some newer bathrooms and kitchens, resists staining far better but can develop a dull surface film. Light grey and white grout make build-up obvious within months; darker grout hides it longer but still collects it.

Kitchen and bathroom tiles need different treatment

KitchenBathroom and laundry
Main build-upCooking grease, food splatter, mop soilSoap scum, hard water marks, surface mould
Typical cleanerAlkaline degreaserScum remover suited to the surface, plus mould treatment
Problem spotsBehind the cooktop, along the kickboardsShower base corners, the lowest row of wall tiles

Natural stone such as marble, travertine and limestone is sensitive to acid, which etches the surface. On stone, only pH-neutral products made for stone are used, and a hidden area is tested first.

How the clean is done

  1. Loose dirt is removed and the tile type is confirmed.
  2. A cleaner suited to the surface and the soil is applied and given time to work, rather than relying on hard scrubbing.
  3. Grout lines are agitated with stiff brushes to loosen what has settled in the joints.
  4. The area is rinsed and the dirty solution extracted, so the residue is removed rather than spread around.

Low-toxicity, eco-friendly products are used wherever they shift the build-up; heavier products are reserved for grease or scum that needs them. Floors are left to dry before normal use.

Shower recesses usually need the longest. Soap scum on glass and the lowest tiles is often layered with hard water minerals, and it softens in stages rather than all at once. Kitchen floors, by contrast, tend to be about removing years of mop residue, and the change in grout colour along traffic paths is often the most noticeable result.

If you want to tackle a small area yourself first, our guides on restoring grout colour and removing soap scum from shower screens cover safe home methods.

What cleaning can and cannot fix

Cleaning lifts soil, grease and surface mould. It will not fix grout that is cracked, crumbling or missing, and it cannot reverse grout that has been stained deep in the joint or bleached unevenly. Mould that has grown into the back of old silicone usually returns, and the lasting fix there is replacing the silicone. See removing mould from bathroom ceilings and silicone for more.

Keeping the result is mostly about moisture and residue. Run the exhaust fan during showers and for a while after, squeegee the screen and walls, and mop floors with a pH-neutral cleaner and clean water so soapy film does not settle back into the joints. Change the mop water as soon as it looks grey.

Tile and grout cleaning can be booked on its own or as part of an end of lease clean. Prime Cleaners Melbourne works across metropolitan Melbourne, Geelong and the Mornington Peninsula. Call 03 9117 6195 for a free written quote, and let us know the tile type and the size of the area.

How it works

  1. Identify the surface

    The tile type and the kind of build-up are confirmed, so the cleaner suits ceramic, porcelain or stone and the soil, whether grease, scum or mould.

  2. Dwell and agitate

    The cleaner is left to work, then grout lines are scrubbed with stiff brushes to break up residue inside the joints.

  3. Rinse and extract

    Dirty solution is rinsed and extracted rather than mopped around, and the surface is left to dry before normal use.

Common questions

Can dark grout be made white again?

If the discolouration is soil, grease or surface mould, cleaning usually brings back much of the original colour. If the grout itself is stained deep in the joint, has been bleached unevenly, or is crumbling, cleaning will improve it but may not fully restore it.

Is it safe to use bleach on grout?

Diluted bleach can lighten surface mould on cement grout, but it should never be mixed with ammonia, vinegar or other acidic cleaners. Ventilate the room, test a hidden spot, rinse well afterwards and follow the label.

Can you clean natural stone tiles?

Natural stone such as marble or travertine is cleaned with pH-neutral products made for stone, because acidic cleaners etch the surface. A hidden area is tested before work begins.

Why does the mould in my shower keep coming back?

Shower mould returns when there is ongoing moisture and poor ventilation, or when it has grown into silicone. Running the exhaust fan, squeegeeing after showers and replacing affected silicone make the biggest difference.

How soon can I walk on the floor after cleaning?

Wait until the tiles and grout lines are dry, which usually does not take long with good airflow. Wet tiles can be slippery, so keep children and pets off until they are dry.

Call Free quote