03 9117 6195 Free quote

Sofa Cleaning Codes Explained: W, S, WS and X

15 November 2026 · 5 min read

Upholstery cleaning codes tell you what kind of cleaner a fabric can handle: W means water-based cleaners, S means solvent-based cleaners only, WS or SW means either, and X means vacuum or brush only with no liquid cleaners at all. The codes are an industry convention rather than a legal standard, so the manufacturer’s own label always takes priority.

Where to find the code

Most sofas and armchairs carry a sewn-in tag or printed label. Look in these places:

  • under the seat cushions, on the platform or deck of the frame
  • on the zipped edge of a removable cushion cover
  • underneath the sofa, stapled to the dust cover
  • in the care booklet or on the retailer’s product page, if you still have it

If there is no tag, treat the fabric as unknown. Ask the retailer or manufacturer using the model name, or have a professional test it before any wet cleaning.

W: water-based cleaners

A W code means the fabric tolerates water-based cleaning products, such as a mild upholstery shampoo or a small amount of gentle detergent diluted in water. Many cotton blends, polyester and some microfibres fall into this group.

Even with W fabrics, use as little moisture as you can. Overwetting can soak the foam, leave brown water rings as it dries, and cause the fabric to shrink on its frame.

  1. Vacuum the area with an upholstery tool to remove loose grit.
  2. Mix your cleaner as the label directs and test it on a hidden spot, such as the back of a skirt or under a cushion.
  3. Apply with a damp white cloth, working from the outside of the mark inward.
  4. Blot with a dry white cloth. Do not rub hard.
  5. Finish with a cloth dampened in plain water to remove residue, then blot dry and let it air dry with good ventilation.

S: solvent-based cleaners only

An S code means water is likely to damage the fabric. Water can cause rings, shrinkage, dye bleed or a change in texture. These fabrics need a water-free dry-cleaning solvent, sold as a solvent upholstery cleaner or spot remover.

Solvents need care of their own. Work in a ventilated room, keep them away from flames and heaters, use small amounts on a cloth rather than pouring onto the fabric, and follow the product label exactly. Many S-coded fabrics, including some viscose blends and delicate weaves, are best left to a professional for anything beyond a small spot.

WS or SW: either type

WS (sometimes written SW or W/S) means the fabric can be cleaned with either a mild water-based product or a solvent cleaner. That flexibility helps: a water-based cleaner suits food and drink spills, while a solvent cleaner often works better on oily marks like body oil on armrests or a dropped piece of buttered toast.

Start with the gentlest option and test first. A WS code does not mean the fabric can be soaked or scrubbed.

X: no water, no solvent

An X code means the fabric should only be vacuumed or lightly brushed. Neither water nor solvent is considered safe. Any liquid cleaner may cause staining, shrinkage or permanent texture change.

For marks on X-coded upholstery, vacuum, brush gently with a soft clothes brush, and leave anything more to a professional upholstery cleaner who can assess the fabric.

Quick reference

CodeWhat you can useAvoid
WMild water-based cleaners, minimal moistureSoaking, solvents unless the label allows
SWater-free solvent cleaners, used sparinglyWater, including plain water on a cloth
WS / SWEither mild water-based or solvent cleanersHeavy wetting, harsh scrubbing
XVacuuming and soft brushing onlyAny liquid cleaner

Why the label beats the code

Not every manufacturer uses the letter system, and some use it alongside their own symbols or written instructions such as professional clean only. Where the written instruction and the code seem to disagree, follow the more cautious one or check with the maker.

Also remember that the code describes the cover fabric, not the whole piece. Leather, suede and nubuck have their own care rules. Cushion covers that unzip are not always meant to be machine washed, even if the code is W, because washing can shrink them so they no longer fit the foam.

Common mistakes with upholstery stains

  • Rubbing a fresh spill. It pushes the stain deeper and roughs up the pile. Blot instead.
  • Using a carpet spotter on a sofa. Carpet products are often stronger and may not suit upholstery fabrics.
  • Drying with a hair dryer. Concentrated heat can set stains and leave a visible ring. Let the area air dry.
  • Cleaning one spot only. On a dirty sofa, a cleaned patch can look brighter than the rest. Sometimes a full clean is the only way to get an even result.

For drink spills that have spread, the steps in our guide to getting red wine out of carpet adapt well to W-coded fabrics. If pets use the couch, moving out with pets covers hair and odour.

When to call in a professional

Bring in help for S and X fabrics, large or old stains, odours that have reached the foam, or any piece you would be upset to damage. If you would like Prime Cleaners to take a look, our upholstery cleaning technicians check the code and test the fabric before choosing a method.

Quick answers

Can I steam clean a sofa with a W code?

A W code allows water-based cleaning, so careful hot water extraction is usually possible, but the moisture must be controlled. Home steam mops and handheld steamers can overwet or overheat fabric. Test a hidden spot and check the manufacturer's instructions first.

What if my sofa has no cleaning code at all?

Treat it as unknown and avoid liquid cleaners until you know more. Contact the retailer or manufacturer with the model name, or have an upholstery cleaner test the fabric.

Want it done for you?

Prime Cleaners handles end of lease, carpet and upholstery cleaning across Melbourne, with police-checked, insured cleaners and a 72-hour re-clean guarantee on bond cleans.

Call Free quote